The mixture of two or more metals which strengthens the metal, and/or enhances its appearance.
A bracelet that is rigid and slides over the hand. Bangle bracelets sometimes don’t have a clasp.
Diamonds or color gemstones are set evenly with the surface of the metal and secured by bead-like prongs between the stones.
A diamond or gemstone is wrapped with metal, where only the crown and table can be seen.
An imperfection on the surface of a diamond.
The amount of sparkle or shine which is reflected from the diamond.
A gemstone cut which is polished into a smooth, rounded dome-like surface, instead of having facets.
A diamond’s measurement for weight, which is equal to 0.2 grams, is described in the four Cs of diamonds.
A setting that has cathedral-like arches on each side of the diamond or gemstone.
Diamonds or color gemstones are arranged adjacent to one another in a channel, with no metal between each stone.
A device that is used to fasten the end of chains, necklaces, bracelets, and watches.
Cracks, openings, or fractures in diamonds or color gemstones.
Diamonds or color gemstones are grouped together, which can be arranged to look like one large stone.
The upper part of a diamond or gemstone, beneath the table and above the girdle.
The small facet on the bottom point of a diamond, beneath the pavilion. Not all diamonds have a culet.
The flat surface on a diamond or color gemstones. The arrangement of a gemstone’s facets determine its cut and return of light.
The flashes of color that can be seen when a diamond or gemstone is moved or rotated.
The highest grading on the diamond clarity scale, has no visible inclusions or blemishes under 10x magnification.
A hole is created in the metal surface, and a diamond or gemstone is placed inside, where its table is evenly set with the surface of the metal.
The four characteristics of a diamond – color, clarity, cut and carat weight – are used to establish the quality and value of diamonds.
The middle section of a diamond or gemstone can be polished or faceted on a diamond and typically unpolished on color gemstones.
The ability of a diamond or gemstone to resist scratches is measured using Moh’s scale of hardness from 1-to 10, with 10 being the hardest.
An ideal cut diamond has the highest quality of proportions, symmetry, and polish, and returns the maximum amount of light from the top of the diamond.
The natural unique \”fingerprints\” within a diamond or gemstone, which consist of other elements such as minerals, gases, or other substances.
Diamonds or color gemstones are set flush within the surface of the metal, where a part of the metal setting is cut away and replaced by the stone.
A diamond or gemstone is set in an arrangement where the metal cannot be seen, making it appear as if there is no setting behind the stone.
The standard measurement for gold, is where 24 karats are pure gold. 14-karat or 18-karat gold is mixed with other metal alloys to strengthen it and enhance its appearance.
The scale which is used to measure the hardness of a diamond or gemstone, or its resistance to scratches, ranges from 1-to 10, with 10 being the hardest.
Small diamonds or color gemstones are held in place by small handcrafted prongs, where all the tables of the stones are set evenly with the metal surface.
The bottom portion of a diamond, between the girdle and the culet.
Pink gold is created when pure gold is combined with more copper than other alloys and is sometimes called rose gold.
The amount of smoothness, or shininess on a metal’s surface. The more polished, the more light reflects off a metal’s surface.
Play of Color
The spectral colors can be seen in an opal when it is rotated or moved.
A diamond or gemstone is mounted to the metal with prongs that wrap around its girdle, and are usually secured to the crown of the stone.
The relationship of a diamond’s parts to one another, such as crown angle, crown height, and table percentage, ultimately determine a stone’s brilliance.
The flashes of light that can be seen in a diamond when rotated under a natural or artificial light source.
Rings, pendants, earrings, bracelets, or necklaces that feature one diamond in its setting.
The precision of the alignment of a diamond’s facets. The more symmetrical, the better the return of light.
The flat surface on the top of a diamond or gemstone.
A diamond or gemstone is suspended inside the metal setting, where most of the diamond is exposed.
The ability of a diamond or gemstone to resist breakage (or fracturing) from impact.
Gold that retains its natural yellow color. Pure gold is typically combined with copper and silver alloys to enhance its durability.
Made by combining pure gold with copper, zinc and nickel (or palladium) alloy, such as rhodium.